|
SA-001
|
23.08.1996
|
N/A
|
All users of DDM.
|
|
SA-002
|
23.08.1996
|
N/A
|
All users of DDM with the link tilt park system.
|
|
SA-003
|
10.01.1997
|
N/A
|
All users of the eagle pipehandling system.
|
|
SA-004
|
04.08.1997
|
N/A
|
All users of DDM.
|
|
|
05.08.1997
|
N/A
|
All users of DDM.
|
|
SA-006
|
21.08.1997
|
N/A
|
All users of DDM.
|
|
SA-007
|
10.12.1997
|
N/A
|
All users of DDM.
|
|
SA-008
|
14.01.1998
|
N/A
|
All users of the eagle HTV system.
|
|
SA-009
|
27.01.1998
|
N/A
|
All users of the manipulator arm.
|
|
SA-010
|
10.03.1998
|
N/A
|
All users of DDM (remote operated elevator).
|
|
SA-011
|
27.03.1998
|
N/A
|
All users of DDM.
|
|
SA-012
|
21.04.1998
|
N/A
|
All users of the hydraulic roughneck.
|
|
SA-013
|
27.05.1998
|
N/A
|
All users of DDM.
|
|
SA-014
|
17.07.1998
|
N/A
|
All users of DDM-650 L with the link tilt park system.
|
|
SA-015
|
24.09.1998
|
N/A
|
All users of DDM.
|
|
SA-016
|
15.12.1998
|
N/A
|
All users of the hydraulic roughneck.
|
|
SA-017
|
03.02.1999
|
N/A
|
All users of the hydraulic roughneck.
|
|
SA-018
|
18.03.1999
|
N/A
|
All users of the intermediate racking arm.
|
|
|
29.06.1999
|
N/A
|
All users of DDM, intermediate sub.
|
|
SA-021
|
16.08.1999
|
N/A
|
All users of the DDM torque wrench.
|
|
SA-022
|
19.08.1999
|
N/A
|
All users of elevators.
|
|
SA-023
|
18.05.2000
|
N/A
|
West Venture, West Navion, Oseberg Øst, Visund,
Bideford Dolphin, Borgland Dolphin.
|
|
SA-024
|
09.06.2000
|
N/A
|
All users of the RamRig DDM.
|
|
SA-025
|
23.06.2000
|
N/A
|
All users of the RamRig hoisting system.
|
|
SA-026
|
05.07.2000
|
SB-FB-001
|
All users of the fingerboard.
|
|
SA-027
|
14.07.2000
|
N/A
|
All users of the RamRig hoisting system.
|
|
SA-028
|
07.08.2000
|
N/A
|
All users of RamRigs.
|
|
SA-029
|
01.11.2000
|
N/A
|
All users of PTD 410/500.
|
|
SA-030
|
21.12.2000
|
N/A
|
All users of the cherrypicker (Bideford
Dolphin & Borgland Dolphin).
|
|
SA-031
|
30.01.2001
|
N/A
|
All users of the cherrypicker in ramguide
(West Navion & West Venture).
|
|
SA-032
|
07.09.2001
|
SB-GE-001 &
PB-GE-001
|
Bondura bolt in the link tilt system dropped down.
|
|
SA-033
|
17.10.2001
|
SB-PH-007 &
PB-PH-001
|
All users of the access basket.
|
|
SA-034
|
29.10.2001
|
SB-PH-004
|
Back up die size 1 fell down to the drill floor.
|
|
SA-035
|
17.01.2002
|
SB-RR-007
|
Cracks in wire sheave in yoke.
|
|
SA-036
|
14.02.2002
|
|
Incident with cracks in the link tilt arm.
|
|
SA-037
|
21.06.2002
|
N/A
|
Incident with DDM pipehandler.
|
|
SA-038
|
25.06.2002
|
SB-PH-012
|
Latch pivot bolt fell from the equipment.
|
|
SA-039
|
13.12.2002
|
SB-RR-008
|
Uncontrolled lowering of utility winch.
|
|
SA-040
|
25.12.2002
|
SB-PH-014-A
|
Stand-lift wire parted and racker head assembly fell to the drill floor.
|
|
SA-041
|
09.01.2003
|
SB-DC-001
|
Crown block guide wheel assembly fell to the drill floor area.
|
|
SA-042
|
29.01.2003
|
SB-DDM-015, SB-DDM-022, SA-079
|
Door from the DDM valve cabinet fell to the drill floor.
|
|
SA-043
|
30.04.2003
|
N/A
|
Protection barrier from DDM came loose and fell to the drill floor.
|
|
SA-044
|
02.07.2003
|
N/A
|
Guiding rod which the DDM torque wrench hangs
from came loose and fell down.
|
|
SA-045
|
19.08.2003
|
N/A
|
Incident involving the instrument air supply system.
|
|
SA-046
|
13.11.2003
|
N/A
|
Mid part of a turnbuckle came loose and fell to the drill floor.
|
|
SA-047
|
22.01.2004
|
SB-DDM-014
|
A sub made up to the saversub on the DDM shaft came loose and fell to the drill floor.
|
|
SA-048
|
29.01.2004
|
SB-GE-004
|
Safety linch pin failed.
|
|
SA-049
|
14.10.2004
|
SB-PH-019
|
Gripper head falled from the DFMA during riser operation.
|
|
SA-050
|
26.10.2004
|
SA-034, SB-PH-004
|
Drillpipe came in between the guide arm and the guide head slide housing.
|
|
SA-051
|
29.10.2004
|
SB-PTD-008
|
Link tilt rotated to the right during torque wrench test.
|
|
SA-052
|
18.11.2004
|
N/A
|
Bolt from the lower clamp assembly came loose and fell to the drill floor.
|
|
SA-053
|
21.01.2005
|
N/A
|
Offset between the gantry crane legs was increased causing the beam/leg bolts to shear.
|
|
SA-054
|
01.06.2005
|
SB-GE-006
|
Pipehandler machine dropped to the drill floor.
|
|
SA-055
|
15.07.2005
|
N/A
|
Fixing bolt and disc spring fell to the drill floor.
|
|
SA-056
|
12.08.2005
|
N/A
|
Pinion assembly detached itself and slipped out of the gearbox.
|
|
SA-057
|
11.10.2005
|
N/A
|
Yoke guide for the IBOP activator came loose and fell to the drill floor.
|
|
SA-058
|
14.12.2005
|
N/A
|
DDM torque wrench clamp die came loose and fell to the drill floor.
|
|
SA-059
|
30.12.2005
|
SB-DDM-016
|
Two fixing bolts from a junction box came loose and a shim dropped to the drill floor.
|
|
SA-060
|
06.02.2006
|
SB-DDM-017
|
Unintentional rotation of the DDM pipehandler at the drill floor level.
|
|
SA-061
|
15.02.2006
|
N/A
|
One of the bolts between dolly arm and main frame came loose and fell to the drill floor.
|
|
SA-062
|
24.03.2006
|
N/A
|
Rubber section of the buffer dislodged and fell down to the drill floor.
|
|
SA-063
|
13.06.2006
|
N/A
|
One of the cylinders operating the DDM link tilt function was destroyed and the cylinder eye was pulled of the rod of the cylinder.
|
|
SA-064
|
06.07.2006
|
N/A
|
Eagle light piphandler machine fell down to the drill floor.
|
|
SA-065
|
08.11.2006
|
SB-RR-009
|
Hydraulic hardware issue on the RamRig hoisting system.
|
|
SA-066
|
14.11.2006
|
N/A
|
Bolt and washer connecting the links of the drag chain came loose and fell to the drill floor.
|
|
SA-067
|
05.01.2007
|
|
Small stop plate came loose from the racker head and fell to the drill floor.
|
|
SA-068
|
08.02.2007
|
N/A
|
Bracket securing the DDM to the dolly came loose and dropped to the drill floor.
|
|
SA-069
|
12.04.2007
|
N/A
|
Recommendation regarding bolts securing the keeper plates.
|
|
SA-070
|
09.10.2007
|
N/A
|
Several torque tube sections fell down to the drill floor due to broken connection bolts.
|
|
SA-071
|
09.10.2007
|
SB-PH-033
|
Lock nut came loose from the telescope cylinder rod end and fell to the drill floor.
|
|
SA-072
|
18.10.2007
|
SB-PH-022
|
A drive chain fell on deck.
|
|
SA-073
|
06.11.2007
|
SB-PH-026
|
Screw and nut came loose from the slew cylinder link bracket and fell to the drill floor.
|
|
SA-074
|
15.11.2007
|
SB-GE-007
|
High pressure hydraulic hoses with incorrect couplings.
|
|
SA-075
|
20.11.2007
|
N/A
|
Side roller from the bridge beam end carriage assembly failed and part of the roller fell to the drill floor.
|
|
SA-076
|
14.12.2007
|
SB-PH-022
|
A drive chain fell on deck.
|
|
SA-077
|
21.12.2007
|
N/A
|
4 pipes dropped from magnets on gantry crane.
|
|
SA-078
|
02.04.2012
|
N/A
|
VOIDED
|
|
SA-079
|
03.04.2008
|
SA-042/SB-DDM-015/SB-DDM-022
|
Valve cabinet doors hit the derrick structure causing the doors to be torn off the cabinet.
|
|
SA-080
|
22.05.2008
|
N/A
|
Hydraulic hose rupture caused a basket of an access basket to tilt down.
|
|
SA-081
|
23.05.2008
|
N/A
|
Pivot bracket attached to the link hanger (by 6 bolts) came undone.
|
|
SA-082
|
03.06.2008
|
N/A
|
The halves of the bracket connection points fell to the drill floor.
|
|
SA-083
|
19.07.2008
|
SB-PH-024
|
9 5/8" casing stand dropped.
|
|
SA-084
|
05.09.2008
|
SB-PH-025
|
Spring tension block.
|
|
SA-085
|
13.11.2008
|
SB-DS-002
|
Fast line stabilizer (Oteco type) came open because of two sheared bolts.
|
|
SA-086
|
16.01.2009
|
N/A
|
Centralizing spring package assembly for guide roller on dolly came loose and dropped to the drill floor.
|
|
SA-087
|
16.01.2009
|
SB-PTD-011
|
Stud bolt for the torque tube stabilizer assembly was cut/broke off.
|
|
SA-088
|
25.02.2009
|
SB-PH-031
|
Pin between the guide arm and the link arm fell down to the drill floor.
|
|
SA-089
|
05.03.2009
|
SB-DSC-002
|
Unintended trigging of the isolation valve.
|
|
SA-090
|
19.03.2009
|
SB-DSC-005
|
Parts of structural bolts fell down to the drill floor.
|
|
SA-091
|
17.04.2009
|
SB-DDM-025
|
Parts of a sleeve bushing fell down to the drill floor.
|
|
SA-092
|
30.04.2009
|
SB-DDM-024
|
Dolly retracted with the drill pipe still connected to the main shaft resulting in damaging the mouse hole tilt cylinder.
|
|
SA-093
|
02.06.2009
|
SB-PH-029
|
Guide roller came loose from a bridge crane and dropped to the drill floor.
|
|
SA-094
|
12.06.2009
|
SB-PH-036
|
Bolts from a racker head of a LGA dropped to the drill floor.
|
|
SA-095
|
23.07.2009
|
SB-PH-030
|
Metal spring came loose from a guide head on a bridge crane and subsequently fell down to the drill floor.
|
|
SA-096
|
07.08.2009
|
N/A
|
Two attachment bolts came loose from a bellyboard and subsequently fell to the drill floor.
|
|
SA-097
|
25.09.2009
|
SB-PH-040
|
Trolley on a riser handling crane was lifted out of position and the motor bracket bolts were overloaded.
|
|
SA-098
|
26.09.2009
|
SB-DDM-028
|
Set of shims came loose from a DDM dolly and subsequently fell down to the drill floor.
|
|
SA-099
|
12.10.2009
|
SB-DDM-033
|
Set of bolts were sheared off and subsequently came loose from a DDM dolly arm.
|
|
SA-100
|
07.12.2009
|
N/A
|
30" gripper head insert dropped down to the drill floor.
|
|
SA-101
|
05.01.2010
|
N/A
|
Piston loosened from the cylinder rod.
|
|
SA-102
|
04.03.2010
|
SB-PH-045
|
Locking device fell down from the direct lift bridge crane gripper head into the setback.
|
|
SA-103
|
22.03.2010
|
N/A
|
Part of a broken die came loose and fell down to the drill floor.
|
|
SA-104
|
09.06.2010
|
N/A
|
Axle lock loosened and fell down to the drill floor.
|
|
SA-105
|
14.06.2010
|
N/A
|
Service technician nearly got caught underneath the basket when the operator was lowering it down.
|
|
SA-106
|
28.06.2010
|
N/A
|
Stand lift wire parted and the racker head assembly fell to the drill floor.
|
|
SA-107
|
28.06.2010
|
N/A
|
Dropped object incident where DDM hit part of BRC.
|
|
SA-108
|
29.06.2010
|
SB-PH-039
|
13 3/8" casing came loose from the twist gripper and fell down to the pipe deck.
|
|
SA-109
|
06.07.2010
|
SB-PH-038
|
6 3/4" drillcollar slipped through the BRC during a transfer from the fingerboard to the well center.
|
|
SA-110
|
06.07.2010
|
SB-PH-042
|
Part of the spring housing on the BRC dropped to the drill floor.
|
|
SA-111
|
09.07.2010
|
SB-PH-037
|
Hangind load fell to the pusher causing the chain to slip on the cabelar wheel. The load and the pusher fell down.
|
|
SA-112
|
13.07.2010
|
SB-PH-034
|
Rubber buffer dropped to the drill floor.
|
|
SA-113
|
14.07.2010
|
YES (ONGOING)
|
Information regarding the use of the DSC locked open function and high load in DSC.
|
|
SA-114
|
05.08.2010
|
N/A
|
A loosened clevis was discovered on a cylinder.
|
|
SA-115
|
25.08.2010
|
N/A
|
The cabinet door fell down.
|
|
SA-116
|
01.09.2010
|
N/A
|
Crank pivot pin came loose from the IBOP actuator shell and fell down to the roof of the drilling cabin.
|
|
SA-117
|
03.09.2010
|
N/A
|
The lowering manrider winch did not stop as intended.
|
|
SA-118
|
10.09.2010
|
SB-DSC-003
|
Excessive wear on the crown block guide wheels and anti de-rail brackets.
|
|
SA-119
|
28.09.2010
|
N/A
|
Dropped handle on the pin for the yoke.
|
|
SA-120
|
13.10.2010
|
SB-PH-041
|
Bolt connecting cylinder to the gripping arm of the TIA dropped to the drill floor.
|
|
SA-121
|
05.11.2010
|
N/A
|
Part of turnbuckle which connects the torque wrench and the pipehandler fell to the drillfloor.
|
|
SA-122
|
19.11.2010
|
SB-DSC-004
|
Failure occurred on the counterbalance wire guide on the fast line side of the rocker arms.
|
|
SA-123
|
06.01.2011
|
N/A
|
Bolt came loose from the torque wrench and fell down to the drill floor.
|
|
SA-124
|
07.01.2011
|
N/A
|
Part of a drag chain installed on a bridge crane came loose and dropped to the drill floor.
|
|
SA-125
|
14.01.2011
|
N/A
|
The M20x50 bolt and washer came loose and fell to the deck.
|
|
SA-126
|
25.01.2011
|
YES (ONGOING)
|
Warning about an incident where the “push and hold” button functions were active after the operator released the button.
|
|
SA-127
|
03.02.2011
|
YES (ONGOING)
|
Incident related to operation of torque release for DDM.
|
|
SA-128
|
05.04.2011
|
N/A
|
Compensation shut down due to faulty hardwiring of the bypass.
|
|
SA-129
|
06.04.2011
|
SB-MDDM-002
|
Hydraulic tension nut with bolt fell down to the drill floor.
|
|
SA-130
|
20.04.2011
|
N/A
|
A bolt which was broken off a nut dropped to the drill floor area.
|
|
SA-131
|
11.05.2011
|
VOIDED
|
Replaced by SA-132.
|
|
SA-132
|
19.05.2011
|
N/A
|
Riser rolled sideways resulting in that the RGC riser lifting yoke side roller bracket fell down to the riser bay floor.
|
|
SA-133
|
17.06.2011
|
YES (ONGOING)
|
An air lubricator bowl (cup) fell down to the drill floor.
|
|
SA-134
|
12.08.2011
|
YES (ONGOING)
|
Guide wheel with bracket dropped to the deck.
|
|
SA-135
|
14.10.2011
|
N/A
|
Slew gear bumper bar/protection frame fell of the PDPH and landed on the deck below.
|
|
SA-136
|
25.11.2011
|
N/A
|
A filler bushing dropped to the drill floor.
|
|
SA-137
|
01.12.2011
|
N/A
|
Riser fell to the riser set back area.
|
|
SA-138
|
07.12.2011
|
|
Washpipe ruptured during pressure testing.
|
|
SA-139
|
22.12.2011
|
N/A
|
Sliding pad fell down to the pipe deck.
|
|
SA-140
|
04.01.2012
|
N/A
|
A lube pump bracket broke, so that the lube oil motor only was hanging from electrical cables and hydraulic hoses.
|
|
SA-141
|
27.01.2012
|
|
Standbuilder arm fell down.
|
|
SA-142
|
09.02.2012
|
N/A
|
Anti lift device fell down to the riser deck.
|
|
SA-143
|
10.02.2012
|
|
Pneumatic tension cylinder for mud loop fell down to the drill floor.
|
|
SA-144
|
21.03.2012
|
|
Damage of the rotation guides.
|
|
SA-145
|
28.03.2012
|
N/A
|
Broken bolts on main upper support bracket.
|
|
SA-146
|
03.05.2012
|
|
Unintended rotation of the DDM pipehandler injured a person working on the drill floor.
|
|
SA-147
|
18.07.2012
|
|
Interface manifold bolts were sheared off, causing oil spill to the drill floor and a potential for dropped objects.
|